Usage/Application | Commercial |
Automation Grade | Automatic |
Water Source | Borewell Water |
Capacity (LPH) | 1000 LPH |
Softener Tank Type | Vertical |
Material | Mild Steel |
Color | White |
Frequency Range | 50-60Hz |
Voltage | 220V |
Resin Volume | 0 - 50 Liters |
Dimensions(L*W*H) | 330*470*660 (mm) |
Regeneration Time(hours) | 1-2hours |
Inlet Hardness(TDS) | 0 - 500 TDS |
Pipe Size In & Out | 1 inch |
Brand | Zero B |
Country of Origin | Made in India |
A water softener uses a mechanical process to remove ionic hardness from your household’s water. Water softeners are used throughout the world for better skin, hair, and overall health. A typical water softener consists of a tall, narrow water-softener tank and a short, wide brine tank. The softener tank is connected to the home's water-supply line and a small-diameter fill tube connects the brine tank to the softener tank. A discharge hose runs from the softener tank to a nearby drainpipe or drywell.
Water softener is a whole-house filtration system that removes hardness-causing calcium and magnesium minerals from your water through a process called ion exchange. It also replaces those minerals with sodium ions. An ion exchange unit for your water can reduce or eliminate the need for laundry detergent and soap, because soap works best in soft water. Water softeners also address one of the most prevalent and devastating water problems.
Water Flow | 1000 LPH |
Dimensons (L*W*H) | 330*470*660 (mm) |
Inlet Water Pressure required (Min-Max) | 1.5 to 3.5 kg/cm2 |
Inlet max Hardness (As Caco3) | 800 ppm |
Treated Hardness (As Caco3) | <50 ppm |
Inlet/Outlet Connection Size | 1 inch |
Drain Line | 0.5 inch |
Electric Supply | 230 V AC/6 Amp - 1 point electric |
Treated water output at 500ppm | 800 ltrs. |
Salt Tank Capacity | 20 kg |
Purple resin quantity | 12.5 ltrs |
Installation footprint | Table top |
Softener Vessels | Included |
Process Valve | Fully Automatic Programmable |
Regeneration Pump | Not applicable |
Salt per recharge in kgs | 2 |
Minimum Order Quantity | 1 Piece |
Usage/Application | Domestic |
Automation Grade | Automatic |
Water Source | Borewell Water |
Capacity (LPH) | 1200 LPH |
Softener Tank Type | Vertical |
Cleaning System | RO |
Material | Mild Steel |
Color | White |
Max Water Recovery Rate | 70-80% |
Frequency Range | 40-50Hz |
Voltage | 240V |
Installation Required | Yes |
Brand | Kent |
Country of Origin | Made in India |
Our water softener for the bathroom not only cleans your water, it also makes it feel softer. Unlike other systems, water softener for the bathroom is easy to set-up and use, so you can start enjoying softer water after just 5 minutes. This only takes 1 minute! The unique design of the four-layer filtering system reduces harmful contaminants for a healthier shower. This water softener for the bathroom is a perfect addition to your home.
water softener for the bathroom converts harmful contaminants into harmless forms in its four-layer filtering system as it removes sediments and physical impurities, hard water salts, chlorine, bad odor, and water softener for bathroom also prevents bacterial growth so that you can enjoy a clean and healthy shower at all times.